江连运,陈亚飞,康广荣,梁佳乐

• 1:太原科技大学机械工程学院
• 2:太钢不锈钢股份有限公司不锈热轧厂

摘要(Abstract)：

随着钢铁行业和工业技术的飞速发展，各种规格和不同种类的板材相继出现，蛇形轧制技术在其中起到了重要的作用，它是为解决厚规格板材异步轧制复合弯曲问题发展而来的一种新型轧制工艺。自2001年蛇形轧制出现以来，受到了国内外专家学者和各种钢厂的广泛关注。为了使读者对蛇形轧制技术及应用能够有更加全面的了解并深入认识到新型工艺的发展前景，文中首先介绍了异步轧制和蛇形轧制工艺技术，给出了蛇形轧制在应用领域的优势所在；然后从蛇形轧制的基本原理着手，将理论与实践有机结合，进而重点概述了蛇形轧制在应变、弯曲曲率、轧制力以及力学性能和组织性能机理分析三个方面的国内外研究现状；最后，总结分析了当前蛇形轧制技术在工业中的应用发展前景，为新一代热机械控制加工工艺的革新提供方向指导。

关键词(KeyWords)： 蛇形轧制;机理分析;发展前景

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(52175354);; 中央引导地方科技发展资金项目(YDZJSX2022A052)

作者(Author): 江连运,陈亚飞,康广荣,梁佳乐

参考文献(References)：

• [1] JING Y A,QIN Y,ZANG X M,et al.The bonding properties and interfacial morphologies of clad plate prepared by multiple passes hot rolling in a protective atmosphere[J].Journal of Materials Processing Technology,2014,214(8):1686-1695.
• [2] JIANG L Y,HUANG J B,ZHEN T,et al.Analytical modeling of plate curvature in snake rolling of heavy aluminum alloy with different deformation zones[J].Rare Metal Materials and Engineering,2021,50(5):1626-1634.
• [3] 祖国胤，李小兵，宋滨娜，等.异步轧制对钢/铝复合板组织与性能的影响[J].功能材料，2010,41(12):2083-2086.
• [4] KIM W J,YOO S J,JEONG H T,et al.Effect of the speed ratio on grain refinement and texture development in pure Ti during differential speed rolling[J].Scripta Materialia,2011,64(1):49-52.
• [5] CHANG D X,WANG P.Effect of interface on microstructure and mechanical properties of Cu/Al laminated composite produced by asymmetrical roll bonding and annealing[J].Rare Metal Materials and Engineering,2020,49(1):85-92.
• [6] 常东旭，王平，赵莹莹.铜/铝异步轧制复合带的界面反应与强化机制[J].东北大学学报(自然科学版),2019,40(11):1574-1578.
• [7] 宋佳宇，刘贵文，魏鹏洋，等.Q345R/316L蛇形轧制复合应变及曲率研究[J].太原科技大学学报，2023,44(6):560-566,570.
• [8] 付垚，谢水生，熊柏青，等.主应力法计算蛇形轧制的轧制力[J].塑性工程学报，2010,17(6):103-109.
• [9] JIANG L Y,C.ZHAO J,YUAN G,et al.Thicker steel plate shape changing law and control method during snake rolling process[J].Metallurgical Research and Technology,2016,113(2):1-11.
• [10] 付垚.高强高韧铝合金厚板的蛇形轧制研究[D].北京：北京有色金属研究总院，2011.
• [11] FU Y,XIE S S,XIONG B Q,et al.Effect of rolling parameters on plate curvature during snake rolling[J].Journal of Wuhan University of Technology(Materials Science Edition),2012,27(2):247-251.
• [12] HAO P J,LU J N.Influence of snake rolling on metal flow in hot rolling of aluminum alloy thick plate[J].Mechanies and Industy,2020,21(5):525-532.
• [13] MENG Q C,JIANG L Y,MA L F,et al.The analytic study on the heavy steel plate snake rolling with the different roll diameters[J].Metallurgical Research & Technology,2019,116(4):402.
• [14] 黄金博，甄涛，卫垚宇，等.同径异速蛇形轧制弯曲曲率建模分析与研究[J].重型机械，2020(4):44-50.
• [15] 薛志伟.双金属板材蛇形轧制复合轧后层厚及应变建模分析[D].太原：太原科技大学，2023.
• [16] 卫垚宇.板带材非对称轧制应变参数建模分析与研究[D].太原：太原科技大学，2022.
• [17] 凌利月，唐建国，刘文辉，等.蛇形轧制对Al-Mg-Si合金板材剪切变形及织构影响的模拟[J].中南大学学报(自然科学版),2017,48(9):2279-2287.
• [18] 刘杰.蛇形轧制铝板曲率及组织和性能研究[D].长沙：中南大学，2014.
• [19] 徐龙飞，孔玲，戚向东，等.基于蛇形轧制与同步轧制协同的高锰钢轧制工艺[J].塑性工程学报，2021,28(12):51-62.
• [20] 张涛，吴运新，龚海，等.蛇形热轧中轧制参数对7075铝合金厚板变形分布的影响[J].中国有色金属学报(英文版),2014,2150-2156.
• [21] YANG H P,SHA Y H,ZHANG F,et al.Through-thickness shear strain control in cold rolled silicon steel by the coupling effect of roll gap geometry and friction[J].Journal of Materials Processing Technology,2010,210:1545-1550.
• [22] GUO L,FUJITA F.Effect of equivalent strain and redundant shear strain on microstructure and texture evolution during hot rolling in Mg–3Al–1Zn alloys[J].Journal of Materials Science,2012,47:6213-6219.
• [23] JIANG L Y,YANG R W,XUE Z W,et al.The theoretical model of the effective strain establishment for the plate during the snake rolling[J].The International Journal of Advanced Manufacturing Technology,2023,128(11-12):4763-4775.
• [24] ZHANG J L,CUI Z S.Prediction of velocity and deformation fields during multipass plate hot rolling by novel mixed analytical-numerical method[J].Journal of Iron and Steel Research International,2011,18:20-27.
• [25] 余望，吴特昌，慈及玲.异步轧制时轧件弯曲规律及控制方法的研究[J].重型机械，1985(8):1-6.
• [26] ZHANG T,WU Y X,GONG H,et al.Bending analysis and control of rolled plate during snake hot rolling[J].Journal of Central South University,2015,22(7):2463-2469.
• [27] 江连运，马琦琦，薛志伟，等.蛇形轧制复合成形镁/铝板材的弯曲曲率研究[J].塑性工程学报，2023,30(3):46-52.
• [28] YANG J X,LI S Y,LIU J,et al.Finite element analysis of bending behavior and strain heterogeneity in snake rolling of AA7050 plates using a hyperbolic sine-type constitutive law[J].Journal of Materials Processing Technology,2017,240(2):274-283.
• [29] 付垚.高强高韧铝合金厚板的蛇形轧制研究[D].北京：北京有色金属研究总院，2011.
• [30] FU Y,XIE S S,XING B Q,et al.Calculation of rolling force in snake rolling by slab method[J].Journal of Plasticity Engineering,2010,17(6):103-109.
• [31] LIU Y M,WANG Z H,WANG T,et al.Prediction and mechanism analysis of the force and shape parameters using cubic function model in vertical rolling[J].Journal of Materials Processing Technology,2022,303:117500.
• [32] JIANG L Y,HUANG J B,ZHEN T,et,al.The steel plate curvature analytic modeling for the snake rolling with the same roll diameters[J].Metallurgical Research and Technology,2021,118(2):205.
• [33] 叶海潮，范武林，秦国华，等.基于翘曲度阈值约束的铝合金板材热轧工艺优化与实验验证[J].兵工学报，2020,41(8):1623.
• [34] WANG H Y,WANG Z H,ZHANG D H,et al.Analysis of snake rolling force and torque with changes of thickness depending on unequal roll radii based on pure aluminum experiments[J].Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2017,231(1):161-174.
• [35] JIANG L Y,ZHEN T,HUANG J B,et al.Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters[J].The International Journal of Advanced Manufacturing Technology,2021,115(11-12):3453-3465.
• [36] LI S Y,QIN N,LIU J,et al.Microstructure texture and mechanical properties of AA1060 aluminum plate processed by snake rolling[J].Materials & Design,2016,90(1):1010-1017.
• [37] XU G F,CAO X W,ZHANG T,et al.Achieving high strain rate superplasticity of an Al-Mg-Sc-Zr alloy by a new asymmetrical rolling technology[J].Materials Science & Engineering A,2016,672(8):98-107.
• [38] 张超.蛇形轧制对Mg-Gd-Y-Nd-Zr合金组织与性能的影响[D].湖南湘潭：湖南科技大学，2023.
• [39] 胥福顺，张劲，邓运来，等.蛇形轧制对Al-Cu-Mg合金板材强韧性能及微观组织的影响[J].中国有色金属学报，2017,27(10):2005-2011.
• [40] LIU X J,JIANG L Y,YUAN G,et al.Research on Deformation Permeability Changing Law during Snake Rolling Process[C]//Materials Science Forum.Trans Tech Publications Ltd,2014,788:367-371.
• [41] HASZLER A.Technical challenges and solutions of aluminum in the transportation market[A][C]//Proceedings of the 11th International Conference on Aluminum Alloys.Aachen,Germany,2008:24-34.
• [42] 雷军义，江连运，孟庆成.厚板蛇形轧制压下量与咬入条件分析与研究[J].重型机械，2018,3:21-25.
• [43] 付垚，谢水生，黄国杰，等.高强高韧铝合金厚板的蛇形轧制技术[J].铝加工，2012,2:18-22.
• [44] 李莎，贾燚，刘欣阳，等.层状镁/铝复合板轧制工艺研究进展[J].精密成形工程，2021,13(6):1-11.