丁福帅,李秋书,吴瑞瑞,袁伟

• 1:太原科技大学材料科学与工程学院

摘要(Abstract)：

采用保温阶段不同连接压力扩散连接和液压的方法，研究叠层结构Al3Cu合金的微观组织和力学性能。结果表明，在保温阶段25 MPa连接压力时，Al3Cu合金的界面氧元素向相邻层均匀分散，粗晶区和细晶区充分结合，形成具有非均匀区域的叠层结构Al3Cu合金。界面处的平均硬度为329.18 HV,介于轧制层和退火轧制层之间。与80%轧制态相比，抗拉强度由301.44 MPa升至310.16 MPa,延伸率由4.1增至8.3,这表明实现了优异的强韧性匹配。

关键词(KeyWords)： 叠层结构;Al3Cu合金;微观组织;力学性能

Abstract:

Keywords:

基金项目(Foundation): 山西省高等学校科技创新项目(2019L0620);; 太原科技大学博士启动基金(20182032);; 来晋工作优秀博士奖励基金(20192027)

作者(Author): 丁福帅,李秋书,吴瑞瑞,袁伟

参考文献(References)：

• [1] 宋洪杰.高强度铝合金及其先进焊接技术研究现状及发展方向[J].世界有色金属.2018(7):200-201.
• [2] 管仁国，娄花芬，黄晖，等.铝合金材料发展现状、趋势及展望[J].中国工程科学，2020,22(5):68-75.
• [3] WU FAN,ZHOU WENLONG,HAN YUJIE,et al.Effect of alloying elements gradient on solid-state diffusion bonding between aerospace aluminum alloys [J].Materials,2018,11(8):1446.
• [4] XU XIAO,MA XINWU,YU SHUBIN,et al.Bonding mechanism and mechanical properties of 2196 Al-Cu-Li alloy joined by hot compression deformation[J].Materials Characterization,2020,167:110486.
• [5] FANG X T,HE G Z,ZHENG C,et al.Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass [J].Acta Materialia,2020,186:644-655.
• [6] 郭夏阳，林建平，孙博.扩散焊技术的研究进展[J].热加工工艺，2014,43(17):15-20.
• [7] 曹慧丽，王振亚，金贵东.一种铝合金扩散焊接工艺方法研究[J].制造工艺，2020,36(3):44-47.
• [8] YANG QINGBO,WANG XINZHU,LI XU,et al.Hot deformation behavior and microstructure of AA2195 alloy under plane strain compression [J].Materials Characterization,2017,131:500-507.
• [9] NIRAJ NAYAN,S V S,NARAYAN MURTY,et al.Effect of temperature and strain rate on hot deformation behavior and microstructure of Al-Cu-Li alloy [J].Journal of Alloys and Compounds,2017(723):548-558.
• [10] 彭胜，初铭强，张书彦，等.铝铜接头的扩散焊连接研究现状[J].金属世界，2020(2):4-7.
• [11] 李建文，李秋书，郭会玲，等.Mg-xSn合金的显微组织、热导率及力学性能研究[J].太原科技大学学报，2018,39(4):298-302.
• [12] JUNQUAN YU,GUOQUN ZHAO,XIAOXUE CHEN,et al.A comparative study on hot deformation and solid-state bonding behavior of aluminum alloys for the integration of solid-state joining and forming processes [J].The International Journal of Advanced Manufacturing Technology,2019,104:3849-3866.
• [13] GAOQIANG CHEN,QINGYU SHI.Experimental investigations on the kinetics of void shrinkage in solid state bonding of AA6061 at high temperatures and high pressures.[J].Materials and Design,2016,89:1223-1226.
• [14] 任洪颖，刘豪，陈影.铝/铜异种材料搅拌摩擦搭接焊工艺及性能研究[J].金属加工：热加工，2020(7):33-36.
• [15] WANG Z,PRASHANTH K G,ZHANG W W,et al.Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases[J].Powder Technology,2019,343:733-737.